MasterCraft IT1-1566 Скачать руководство пользователя страница 2

1. DO NOT

leave the vacuum when

plugged in. Unplug it from the outlet
when not in use and before servicing.

2.

This is

NO

T a toy. Close attention is

necessary when used around or near
children.

3.

Use only as described in this safety

manual. Use only manufacturer’s rec-
ommended attachments and acces-
sories.

4. DO NOT

use this vacuum with dam-

aged cord or plug. If the vacuum is not
working as it should, because it has
been dropped, damaged, left outdoors
or dropped into water, contact an
authorized service center or factory.

5. DO NOT

pull the vacuum by the cord,

use cord as a handle, close a door on
the cord or pull cord around sharp
edges and corners. 

DO NOT

run the

vacuum over the cord. Keep cord away
from heated surfaces.

6. DO NOT

unplug the vacuum by pulling

on the cord. To unplug, grasp the plug,
not the cord.

7. DO NOT

handle the vacuum plug or

vacuum with wet hands. 

8. DO NOT

put any objects into open-

ings. 

DO NOT

use with any openings

blocked; keep free of dust, lint hair, and
anything that may reduce air flow.

9.

Turn 

OFF

all controls before unplug-

ging.

10

. Keep hair, loose clothing, fingers,

and all parts of your body away from
openings and moving parts.

11. DO NOT

pick up anything that is

smoking or burning such a cigarettes,
matches, or hot ashes.

12.

When used for dry pickup

DO NOT

use without dust bag or filters in place.

13.

Use extra care when cleaning on

stairs.

14. DO NOT

use this vacuum to pick up

flammable or combustible liquids such
as gasoline or use in areas where they
may be present.

15. DO NOT

use where anesthetics and

oxygen are used.

16.

Replace damaged or worn parts

immediately with genuine original equip-
ment parts to maintain safety and to
protect your limited warranty.

17. DO NOT

use an extension cord

unless absolutely necessary. If an exten-
sion cord is used, then wire size must
be #14 gauge or larger and should not
exceed 50 feet in length. Use only (3)
conductor grounding extension cord  to
insure GROUNDING protection. 

This vacuum must be connected to a
properly grounded outlet only. See
grounding instructions (Page 3)

S

AVE

T

HESE

I

NSTRUCTIONS

To reduce the risk of fire, Electric Shock or Injury:

DO NOT expose to rain - Store Indoors

When using this electric vacuum, basic precautions should 

always be followed,

including the following:

W

ARNING

:

P

AGE

2

I

MPORTANT

S

AFETY

I

NSTRUCTIONS

Содержание IT1-1566









Отзывы: