MasterCraft CSX 220 2008 Скачать руководство пользователя страница 74

Страница: 74 / 77

ecognizing

the

pride

that

aster

raft

owners

take in their boats, MasterCraft worked diligently

to develop our own line of products designed

specifically to ensure a boat that will retain its appeal for

years to come. As you maintain your boat over the com-

ing years, use Genuine MasterCraft parts (GMP) to keep

the pride!

MasterCraft Marine Motor Oil

The life of your marine engine is dependent upon proper

lubrication, regardless of its make. That is why we’ve

developed MasterCraft Marine Motor Oil. This premium

marine motor oil was formulated specifically for Master

Craft’s use in high-performance marine engines. The

Marine Motor Oil provides high viscosity and film strength

for engine protection in high-load applications.

MasterCraft Marine Motor Oil is designed to protect

against corrosion, wear, oxidation, varnish and sludge

deposits. When used as directed, this oil assures com-

pliance with MasterCraft warranty requirements. Master-

Craft Marine Motor Oil is an exclusive product available

only through authorized MasterCraft dealerships!

MasterCraft Premium All-Purpose

Cleaner

Most MasterCraft boat owners pay attention to the de-

tails, especially when it comes to the maintenance and

life of the boat interior. We give you information in this

Manual on how to extend the life of the boat’s interior.

We especially caution you to avoid certain household

cleaners, powdered abrasives, steel wool and industrial

cleaners that may cause damage and discoloration. Dry

cleaning fluids and lacquer solvents should

not be used

as they will remove the printed pattern and gloss of the

boat’s interior.

No cleaner can remove every mark or stain, but we pro-

vide a table in this Manual that informs you what cleaning

agents to use and how to treat many stains. With this

product, MasterCraft Premium All-Purpose Cleaner, you

can clean with confidence!

A powerful cleaner that cuts through grease, dirt and

grime, MasterCraft Premium All-Purpose Cleaner is an

exclusive product available only through authorized Mas-

terCraft dealerships!

MasterCraft Vinyl Dressing

After boat owners get the interior surfaces clean, they

like to have a product that will help keep everything look-

ing ship-shape. Waxes are not recommended for interior

surfaces because many contain dyes or solvents that

can permanently damage the protective coating of the in-

terior. That’s why we developed MasterCraft Vinyl Dress-

ing to guard against excessive damage from ultraviolet

rays, environmental conditions and everyday use, while

adding years of life and beauty.

This product penetrates, protects and beautifies, but it

contains no fluorocarbons. MasterCraft Vinyl Dressing

provides a protective shield that gives a long-lasting ap-

peal for plastic, plexiglass, vinyl, rubber, acrylics, For-

mica, wood and leather—so it can be used on more than

just the boat!

For best results, consumers should leave the Vinyl

Dressing on surfaces for several hours or overnight be-

fore removing any excess. This product is available only

through authorized MasterCraft dealerships.

MasterCraft Spray Wax

If you take great pride in the appearance of your boat,

by using MasterCraft Spray Wax you help ensure a long-

lasting and attractive shine for the deck and hull. This pre-

softened formula combines carnauba wax with efficient

cleaning agents that remove oxidation, engine exhaust

spill-off and other contaminants. MasterCraft Spray Wax

provides a deep gloss with long-lasting protection from

UV rays, salt air and harsh weather conditions. It’s great

for fiberglass, gel coat, aluminum, chrome and painted

surfaces.

This product protects and inhibits color fading and cleans

effectively without harmful abrasives, leaving a beautiful

glossy shine. It protects against harsh weather condi-

tions, too. Using this GMP product will assist boat owners

in following the requirements outlined in this Manual for

providing protection over the life of the boat.

MasterCraft Spray Wax is an exclusive product available

only through authorized MasterCraft dealerships!

genuine

mastercraft parts

2008 MasterCraft Owners Manual Page 21-1

genuine

mastercraft parts

Содержание CSX 220 2008














































































Результаты поиска

Содержание CSX 220 2008

Отзывы:

Похожие инструкции для CSX 220 2008

Бренды по названию

Популярные бренды

MasterCraft CSX 220 2008, Руководство пользователя

Результаты поиска

Содержание CSX 220 2008

Отзывы:

Похожие инструкции для CSX 220 2008

Бренды по названию

Популярные бренды