ASSEMBLY
WARNING:
To reduce the risk of injury,
Fig.2
always unplug tool before attaching or removing
accessories or making adjustments. Only use
specifically recommended accessories.
Installation of dust bag
(see Fig.2)
Squeeze the metal collar wings on the dust bag
and place bag neck opening around the dust
extraction port. Release the metal collar wings.
Release and lock saw head
1. Press and slightly hold down saw head.
Pull out stop latch to release saw head.
Saw head should move up and down
freely (see Fig.3).
2. Place saw head to the lowest position.
Insert stop latch to lock down the saw
head for transporting and storage.
Removing the blade (see Fig. 4)
WARNING:
To reduce the risk of injury, always unplug tool before removing
and installing a blade.
1. Raise the saw head.
2. Loosen (but do not remove) the
screw on the blade screw guard
(Fig.1, point 5) counter-clockwise
with a screwdriver.
3. Rotate blade screw guard to
expose blade screw.
4. Press and hold the spindle lock
button. (Fig.1, point 18) Remove
the threaded blade screw using the
wrench and turning the blade
screw clockwise.
5. Lift and hold up the lower blade guard.
6. Remove the outer flange and blade. Wipe the flanges and spindle to remove dust
and debris.
Fig.3
Fig.4
Dust bag
Dust
extraction
port
Stop latch
Inner flange
Outer flange
Threaded blade
screw
Blade
10
Содержание 55-6857-6
Страница 17: ...17 ...
