MasterCraft 54-6505-6, Руководство пользователя

Страница: 13 / 19

13
ASSEMBLY & OPERATION
ON/OFF TRIGGER SWITCH
The heat gun has an ON/OFF trigger
switch that is used to turn the heat gun ON
and OFF.
To turn the heat gun ON squeeze the
lower part of the ON/OFF switch (1)
(Fig. 1). To turn the ON/OFF switch OFF,
squeeze the upper part of the ON/OFF
switch (2).
NOTE:
When the heat gun is first turned
ON, smoke may appear due to the burning
of manufacturing oils on the element. The
smoke will disappear within five minutes of
operation.
DIGITAL TEMPERATURE & FAN SPEED
CONTROLS
Both the temperature and the speed of the
air coming from the heat gun nozzle can
be adjusted using the digital controls
located in the rear of the heat gun.
NOTES:
a. The ON/OFF trigger switch must be
turned ON before the temperature
control, fan speed control and the
digital display will function.
b. The digital control memory function
will automatically set the heat gun at
the previously set temperature and fan
speed when the switch is turned ON.
Setting the fan speed
The fan speed can be set at five different
speeds. Higher fan speeds will move more
air through the heat gun and will generally
deliver more hot air to the surface being
heated.
WARNING:
Have you read
“POWER TOOL SAFETY”,
“SPECIFIC SAFETY RULES”,
EXTENSION CORD SAFETY” and
“SYMBOLS” on pages 3 through 9 of
this Manual? If not, please do it now
before you operate this heat gun.
Your safety depends on it!
Every time you use the heat gun you
should verify the following:
1. The nozzle is not obstructed
with debris
2. Appropriate safety glasses,
respirator mask and protective
clothing are being worn
3. Area adjacent to the heating
application is clear of all
combustible materials
4. Availability of water or fire
extinguisher in case of a fire.
Failure to adhere to these safety
rules can greatly increase the
chances of injury or property
damage.
!
Fig. 1