6
ASSEMBLY INSTRUCTIONS
ASSEMBLY
PREPARATION
• Assemble the storage cabinet on a clean, level surface.
• Remove all items from the packaging box and ensure that all parts listed on
pages 4 and 5 are included.
• When installing parts that have more than one screw, tighten all screws by hand
before tightening them with the screwdriver provided.
ASSEMBLY INSTRUCTIONS
1. Install Left Panel (3) to Top
Panel (2)
Attach the Left Panel (3) to the Top
Panel (2). Line up screw holes, and
secure with three Screws (10) using
Screwdriver (13).
Note:
Make sure the panels are flush
before fastening (Fig. A).
2. Install Right Panel (4) to Top
Panel (2)
Attach the Right Panel (4) to the Top
Panel (2). Line up screw holes, and
secure with three Screws (10) using
Screwdriver (13).
Note:
Make sure the panels are flush
before fastening
(
Fig. B).
3. Install Bottom Panel (1)
Attach Bottom Panel (1) to the Left
Panel (3) and Right Panel (4) as
shown in Figure. Line up screw holes
and and secure with six Screws (10)
using Screwdriver (13) (Fig. C)
Fig. A
Fig. B
Fig. C
