model no. 058-9805-6 | contact us 1-800-689-9928
10
11
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
SETUP
OPERA
TING INSTRUCTIONS
SETUP Of THE INflATOR
1. Place the inflator (A) evenly on flat surface.
2. Connect the recoil air hose (I) to the inflator by pulling back the quick connect coupler (K) and inserting it
onto the fitting at the end of the rubber hose (E). Push firmly and release the quick connect coupler—you
will hear a click when the quick connect coupler is attached onto the fitting securely and in place.
3. Insert the power cord plug (H) into the nearest 120-volt, grounded, electrical outlet.
4. Turn on the On/Off power switch (F) and inspect the air connections for leaks.
5. Turn off the On/Off power switch and unplug the inflator, then repair any leaks found.
IMPORTANT:
This inflator operates only on AC 120 Volt. Do not attempt to operate this inflator with any
other source or voltage. Do not rewire or reconfigure the inflator from its original design or personal injury
and/or bodily harm may occur.
SETUP Of INflATOR
AREA
1. Designate a work area that is clean and well-lighted. The work area must not allow access by children or
pets to prevent injury.
2. Locate the inflator on a flat, level surface to prevent damage to the unit. Keep at least 12" (30 cm) of
space around the unit to allow air circulation.
3. Route the power cord from the inflator to the grounded wall outlet, along a safe path without creating a
tripping hazard or exposing the power cord to possible damage.
OPERATING INSTRUCTIONS
IMPORTANT:
Before operation, follow all the instructions in the SETUP section.
IMPORTANT:
Inflation time may vary depending on size of tire, climate, temperature and voltage level of
vehicle/internal battery.
TO INflATE ITEM:
1. Plug the inflator power cord (G) into a grounded 120 Volt outlet.
2. Connect the lock-on tire chuck (J) to the tire air valve. Unlock the tire chuck by pulling the chuck tab up.
Lock the tire chuck once it is fixed to the tire valve. Make sure that the tire chuck is attached to the tire
valve stem tightly and securely.
3. Turn on the On/Off switch (F) of the inflator (A). Monitor the PSI on the pressure gauge (C) to fill your item
to the desire pressure.
4. Turn the inflator off once the desired air pressure in the tire has been reached.
5. Remove the tire chuck (J) from the tire valve stem.
6. Unplug the inflator after use.
IMPORTANT:
When inflating bike tires, sports equipments and air mattresses, use the Presta valve adaptor
(N), sports ball needle (M), or mattress nozzle (L) as needed. Insert it to the central hole of the tire chuck (J)
before inflation.
IMPORTANT:
This inflator features a pressure gauge (C) with glow-in-the-dark display for easy reading of
tire pressure during the inflation process.
USE Of 5 HIGH flOW ACEESSORIES
IMPORTANT:
The high air accelerator kit is a great device for inflating or deflating air mattresses, small
boats, inflatable toys and a variety of other items which use a large volume of low pressure air.
IMPORTANT:
The attachments are not to be used with automobile tires, bicycle tires, sports balls, or any
other high pressure inflatables.
IMPORTANT:
The high flow air accelerator kit comes with three nozzles of varying sizes, an air accelerator
body and an enlargement collar to prevent the air from leaking out of the inflatable when it is being filled.
WARNING!
• Read the entire important safety information at the above section of “SAFETY GUIDELINES” before set up or use of this product.
• To prevent serious injury from accidental operation, turn the power switch “Off” and unplug the inflator from its electrical outlet
before assembling or making any adjustments to the inflator.
• Before operating, make sure the inflator is set up in a well-ventilated area, on a flat, level, solid surface well away from any
flammable objects, such as drapes. Never operate without proper ventilation, or near possible ignition sources.
WARNING!
• Do not over-inflate the item being inflated. Monitor air pressure (PSI) at all times during the inflation process by observing
the pressure gauge on the inflator.
• To prevent serious injury from inflator failure, do NOT use damaged equipment. If abnormal noise or vibration occurs, have
the problem corrected before further use.
• To prevent serious injury from accidental operation, turn the power switch “OFF” and unplug the inflator from its electrical
outlet before performing any inspection, maintenance, or cleaning procedures.
• If the power cord of this inflator is damaged, it must be replaced only by a qualified technician.
