9
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 058-9852-2 | contact us 1-800-689-9928
8
SAFETY GUIDELINES
KEY P
AR
TS DIAGRAM
KEY PARTS DIAGRAM
No.
Description
A
Multi-purpose inflator
B
Carrying handle
C
Pressure gauge
D
Inflator air outlet
E
Rubber air hose
F
On/Off switch
G
Power cord
H
Power cord plug
No.
Description
I
Recoil air hose
J
Lock-on tire chuck
K
Quick connect coupler
L
Mattress nozzle
M
Sports ball needle
N
Presta valve adaptor
O
5 High flow accessories
INFLATION
DEFLATION
F
G
H
O
N
E
M
L
B
A
J
I
K
C
D
GUIDElINES fOR USING EXTENSION CORDS
Verify that the extension cord is in good condition. When using an extension cord, be sure to use one that
is heavy enough to carry the current that the tool will draw. An undersized cord will cause a drop in line
voltage, which will result in loss of power and overheating. The table below shows the correct size to use
according to cord length and the amperage rating on the tool’s nameplate. When in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the cord.
Verify that the extension cord is properly wired and in good condition. Always replace a damaged extension
cord, or have it repaired by a qualified electrician before using it. Keep extension cords away from sharp
objects, excessive heat, and damp or wet areas.
INflATOR USE AND CARE SAfETY WARNINGS
•
Do not use the inflator if the switch does not turn it on and off. Any inflator that cannot be controlled
with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing the inflator. Such preventive safety measures reduce the risk of starting the inflator accidentally.
• Store an idle inflator out of the reach of children and do not allow persons unfamiliar with the inflator
or these instructions to operate it. An inflator is dangerous in the hands of untrained users.
• Maintain the inflator. Keep the inflator clean for better and safer performance. Keep dry, clean and free
from oil and grease. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the inflator’s operation. If damaged, have the inflator repaired before
use. Many accidents are caused by a poorly maintained inflator.
• Use the inflator in accordance with these instructions, taking into account the working conditions and
the work to be performed. Use of the inflator for operations different from those intended could result
in a hazardous situation.
SERVICE SAfETY WARNINGS
• Have your inflator serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the inflator is maintained.
Amperage rating of the tool
(120 V circuit only)
Total length of the extension cord
25’ (7.6 m)
50’ (15.2 m)
100’ (30.4 m)
150’ (45.7 m)
More than
Not more than
Minimum gauge for the extension cord (AWG)
0
6
18
16
16
14
6
10
18
16
10
12
16
16
12
16
14
12
Do not use
Do not use
Do not use
WARNING!
If any part is missing or damaged, do not use the product until the missing or damaged part has been replaced.
WARNING!
This product must be grounded while in use in order to protect the operator from electric shock.
