ASSEMBL
Y INSTR
UCTIONS
15
8
U.S.
GALLONS (30.3 L) AIR COMPRESSOR 058
-
9316
-
0
Positioning of the air compressor
1. Position the air compressor (1) near an
electrical outlet (2)
(fig A)
.
2. The compressor must be at least 12"
(31 cm)
from any wall (3) or obstruction,
in a clean, well
-
ventilated area to ensure
sufficient air flow and cooling
(fig A).
3. Place the air compressor on the floor or
a hard, level surface. The air compressor
must be level to ensure proper drainage
of the moisture in the tank.
Wheel assembly
4. Insert the axle (1) through one of the
wheels
(fig B)
.
5. Insert axle (1) through the bracket on the
bottom of the tank assembly. Slide on
washer (2), lock washer (3) and tighten
the nut (4)
(fig B)
.
6. Once assembled, roll the air compressor
to test the operation of the wheels.
Periodically check to ensure that wheel
and axle hardware is secure
(fig B)
.
Air filter assembly
7. Screw the air filter (1) onto the pump
(fig C).
Removable handle assembly
8. Insert handle into the fixed steel sleeves.
Align the tapped holes (1) with the holes
on the steel sleeve
(fig D)
.
9. Fasten the handle to the sleeves using
the thumbscrews (2)
(fig D)
.
MC-589316-09
fig A
2
3
1
MC-589316-10
fig B
1
2
3
4
MC-589316-11
fig C
1
MC-589316-12
fig D
2
1
