MasterCraft 058-9312-8, Инструкция по эксплуатации

Страница: 6 / 99

SAFETY GUIDELINES
5
AIR - POWERED GRAVITY - FEED SPRAY GUN 058 - 9312 -8
• Risk of bursting: Do not adjust the pressure switch or safety valve for any
reason. They have been preset at the factory for this compressor’s maximum
pressure. Tampering with the pressure switch or the safety valve may cause
personal injury or property damage.
• Risk of bursting: Make sure the regulator is adjusted so
that the compressor outlet pressure is set lower than the
maximum operating pressure of the tool. Before starting
the compressor, pull the ring on the safety valve to make
sure the valve moves freely. Drain water from tank after
each use. Do not weld or repair tank. Relieve all pressure
in the hose before removing or attaching accessories.
• Do not use this tool in the presence of flammable liquids
or gases: Sparks that are created during use may ignite
gases. Please use the tool in a well
- ventilated area only
and avoid any ignition sources such as smoking and open
flames
.
• Do not use oxygen or any other combustible or bottled
gas to power air-powered tools. Failure to observe this
warning can cause explosion and serious personal injury
or death. Use only compressed air to power air-
powered tools. Use a minimum of 25
' (7.6 m) of hose to
connect the tool to the compressor. Failure to comply will
result in serious injury or loss of life.
MC-OM-22
MC-OM-05
Oxygen
Hydrogen
Explosive
Combustible
MC-OM-02