MasterCraft 058-813-2, Инструкция по эксплуатации

Страница: 8 / 29

SAFETY GUIDELINES
8
AIR
-
POWERED STAPLER 058
-
8132
-
2
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
•
Always ensure that the tool has stopped before connecting to the air supply.
• Do not wear watches, rings, bracelets, or loose clothing when using any air
tool.
•
Do not overload the tool. Allow the tool to operate at its optimum speed for
maximum efficiency
.
• Do not use a tool that is leaking air, with missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
• Always keep your air tool clean and lubricated. Daily lubrication is essential
to avoid internal corrosion and possible failures.
• Ensure the floor is not slippery and wear non
-
slip shoes. Floors should be
kept clean and clear.
• Always follow all workshop safety rules, regulations, and conditions when
using the Air
-
powered Stapler.
• Carry the tool by the handle only, keeping the fingers away from the trigger.
Do not carry the tool by the hose, magazine, or any other parts.
• Do not use the tool near or below freezing conditions, as doing so may
cause the tool failure.
• Do not store the tool in a freezing environment to prevent ice formation on
the operating valves of the tool, as doing so may cause tool failure.
• Handling and storage of oil: Use with adequate ventilation. Avoid contact of
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a
tightly closed container in a cool, dry, well
-
ventilated area free from
incompatible substances.