MasterCraft 058-813-2, Инструкция по эксплуатации

Страница: 19 / 29

OPERA
TING INSTR
UCTIONS
19
AIR
-
POWERED STAPLER 058
-
8132
-
2
Clearing a jammed staple
To clear a jammed staple
• Disconnect the tool from the air supply line.
• Remove the staples that are stored in the tool’s magazine.
• Operate the latch and pull it back to open the magazine.
• Use pliers or any appropriate tool to remove the jammed staples.
• Reload the staples into the tool magazine.
• Slide the pusher against the staples to close the magazine and verify that the latch is moved
to its original position.
• Reconnect the air line to the tool’s air inlet.
• Test fire 3 to 5 staples into a piece of scrap wood in order to ensure proper operation.
Note: If the staples continue to jam, please call 1
-
800
-
689
-
9928.
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Operate the tool with the utmost care when it is connected with the
air compressor
.
Failure to comply may result in moderate injury or damage to
equipment.