model n
o. 058-8194-4 | contact us 1-800-689-9928
PACKAGING CONTENTS
8
9
1.1 Remove cartons, bags or foam containing the welder and accessories.
1.2 Check the contents with the packing list below.
ITEM
QTY.
Portable Inverter Plasma Cutter
1 unit
Electrode
3 pcs
Nozzle
3 pcs
Operator’s manual
manual
1 Use a compressor that is capable of supplying 3.5 CFM @ 70-90 PSI..
2 Incorporate a filter, regulator with pressure gauge, dryer, in-line shutoff valve, and quick coupler
for best service. An in-line shutoff ball valve is an important safety device because it controls the air
supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be
closed quickly.
3 Attach an air hose to the compressor’s air outlet. Connect the air hose to the Air Inlet (1/4”NPT Female)
on the back of the Plasma Cutter. Other components, such as a coupler plug and quick coupler,
will make operation more efficient, but are not required.
4 Set the Plasma Cutter’s power switch to the OFF position.
5 Turn on the air compressor according to the manufacturer’s directions and allow it to build up
pressure until it cycles off.
6 Set the air compressor’s output air pressure regulator between 90–120 PSI. Adjust the pressure
gradually, while observing the air pressure gauge.
7 Inspect the air connections for leaks. Repair any leaks found.
ASSEMBLY PREPARATIONS
model n
o. 058-1294-8 | contact us 1-800-689-9928
model n
o. 058-1294-8 | contact us 1-800-689-9928
model n
o. 058-1294-8 | contact us 1-800-689-9928
Grounding clamp with 10' (3 m) cable
Plasma Cutting Torch with 11' 6" (3.5m)Cable
pc
pc
1
15-A plug adaptor with 2' (0.6 m) cable pc
1
1
1
WARNING!
Note:
1.In humid locations, multiple dryers may need to be incorporated to keep the air dry.
MOISTURE.
IN AIR SUPPLY MAY CAUSE SHORTENED COMPONENT LIFE AND POOR CUT QUALITY.
2. Do not use an oiler system with this plasma cutter. The oil will mix with the air being
propelled, causing poor results.
3. Air flow, and therefore Plasma Cutter performance, can be hindered by undersized air
supply components. The air hose must be long enough to reach the work area with enough
extra length to allow free movement while working.
PACKAGING CONTENTS
ASSEMBLY PREPARATIONS
Model no. 058-1929-0 | contact us 1-800-689-9928