7
self-levelling cross-line laser level - 057-4587-6
8
self-levelling cross-line laser level - 057-4587-6
Know your self-levelling cross-line laser level
2
4
3
5
6
7
1
No. Description
No. Description
1
mode button
5
1/4" threaded mounting hole
2
leD indicator
6
Battery compartment
3 Power
switch
7 stand
4
laser aperture
the safe use of this product requires an understanding of the information on the tool and in this
instruction manual, as well as knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
Power switch
Push the power switch to the left position to
turn the self-levelling cross-line laser level
on, and slide the power switch to the right
position to turn the tool off (fig 1).
To install batteries
(fig 2)
the battery compartment holds two “aa”
batteries.
1. Push the latch to open the battery cover.
2. insert two new “aa” alkaline batteries,
following the polarity (+/-) as indicated on
the pole plate.
3. securely close the cover.
NOTE:
• always turn off the tool before installing
or replacing the batteries.
• remove the batteries from the tool when
not using it for extended periods.
• the 2 aa batteries should match each
other in brand and type.
• Do not mix old and new batteries.
• remove depleted batteries immediately, and dispose of them according to the laws and
regulations governing your community.
De
SC
ri
PT
ion
oP
era
Ting
in
ST
rUCT
ion
S
fig 2
latch
6
fig 1
on
off
