5
self-levelling cross-line laser level - 057-4587-6
6
self-levelling cross-line laser level - 057-4587-6
Safe
TY
gU
iD
eline
S
this self-levelling cross-line laser level has a built-in laser light. the laser is class ii and emits
output power of a maximum 1 mW and 650 wavelengths. these lasers do not normally present
an optical hazard. However, do not stare at the beam, as this can cause flash blindness.
the following labels are on your tool. they indicate the
location from which the laser level emits the laser light.
always be aware of the laser light location when using the
tool. always make sure that any bystanders in the vicinity
of use are made aware of the dangers of looking directly
into the laser.
WARNING!
LASER RADIATION. DO NOT STARE INTO
BEAM. Class II laser product.
turn the laser
beam on only when using this tool.
• Do not remove or deface any product labels.
• Avoid direct eye exposure.
the laser beam can cause
flash blindness.
• The laser level is not a toy. Always keep it out of the
reach of children.
the laser light emitted from this tool should never be directed toward
any person for any reason.
• Do not operate the tool around children or allow children to operate the tool.
• Do not place the tool in a position that may cause anyone to stare at the laser
beam, whether intentionally or unintentionally.
• Do not use on surfaces such as sheet steel that have shiny, reflective surfaces.
the
reflective surface could reflect the beam back at the operator.
• Always turn the laser tool off when not in use.
leaving the tool on increases the risk of
someone inadvertently staring into the laser beam.
• Do not attempt to repair or disassemble the self-levelling cross-line laser level.
if unqualified persons attempt to repair this product, serious injury may occur. any repair
required on this laser product should be performed only by authorized service personnel.
• Do not operate the tool in combustible areas, such as in the presence of flammable
liquids, gases, or dust.
• Use of other accessories that have been designed for use with other laser tools
could result in serious injury.
• Keep batteries out of reach of children.
• Save these instructions.
refer to them frequently and use
them to instruct others who
may use this tool. if you loan this tool to someone else, also loan these instructions to them to
prevent misuse of the product and possible injury.
Safe
TY
gU
iD
eline
S
MADE IN CHINA/FABRIQUÉ EN CHINE IMPORTED BY/IMPORTÉ PAR
MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8
057-4587-6
SELF-LEVELLING CROSS-LINE
LASER LEVEL
NIVEAU AU LASER À FAISCEAUX
CROISÉS AUTONIVELANT
3V 2×1.5 V AA Battery
3V 2 piles AA de 1,5V
CAUTION
ATTENTION
650nm, P≤1mW, Class II laser product
Complies with 21 CFR parts
1040.10 and 1040.11
650nm, Puissance≤1mW, Produit laser de
classe II, Conforme au règlement 21 CFR
sections 1040.10 et 1040.11
LASER RADIATION
DO NOT STARE INTO BEAM
RAYONNEMENT LASER : NE REGARDEZ
PAS DIRECTEMENT LE FAISCEAU.
DATE CODE: CODE DE DATE :
