MasterCraft 055-6767-0 Скачать руководство пользователя страница 42

Страница: 42 / 66

model no. 055-6767-0 | contact us 1-800-689-9928

MAKING A BASIC CUT (Fig. 33)

BODY AND HAND POSITION

Starting a cut:

• Place hands at least 7 1/2" (19 cm) away

from the path of the blade – out of the

“no-hands zone” (1).

• Hold workpiece firmly against the fence to

prevent movement towards the blade.

• Turn the laser guide on for pre-alignment of

your cut.

• With the power switch OFF, bring the saw

blade down to the workpiece to see the

cutting path of the blade.

• Squeeze trigger switch to start saw.

• Lower blade into workpiece with a firm

downward motion.

Finishing a cut:

• Hold the cutting arm in the down position.

• Release trigger switch and wait for all

moving parts to stop before moving your

hands and raising the cutting arm.

• If the blade doesn’t stop within 10 seconds,

unplug the saw and follow the instructions

in the TROUBLESHOOTING GUIDE section.

Before freeing jammed material:

• Release trigger switch.

• Wait for all moving parts to stop.

• Unplug the mitre saw.

OPER

TION

Fig. 33

7 1/2" (19 cm)

WARNING!

•

Never place hands near the cutting area. Proper positioning of your

body and hands when operating the mitre saw will make cutting

easier and safer. Keep children away. Keep all visitors at a safe

distance from the mitre saw. Make sure bystanders are clear of the saw

and workpiece. Don’t force the saw. It will do the job better and safer at its

designed rate.

7 1/2" (19 cm)

Содержание 055-6767-0



































































Результаты поиска

Содержание 055-6767-0

Отзывы:

Похожие инструкции для 055-6767-0

Бренды по названию

Популярные бренды

MasterCraft 055-6767-0, Инструкция по эксплуатации

Результаты поиска

Содержание 055-6767-0

Отзывы:

Похожие инструкции для 055-6767-0

Бренды по названию

Популярные бренды