MasterCraft 054-8296-0, Инструкция по эксплуатации

Страница: 6 / 20

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-8296-0 | contact us 1-800-689-9928
6
GENERAL
POWER T
OOL
SAFETY W
ARNINGS
7) Use caution when operating the heat gun. Keep the heat gun moving as excessive heat will generate fumes
which can be inhaled by the operator.
8) Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth before eating or
drinking. Do not smoke or chew gum or tobacco in the work area.
9) Clean up all removed paint and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills
and any other surface where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high
phosphate detergent or trisodium phosphate (TSP) to wash and mop areas.
10) At the end of each work session put the paint chips and debris in a double plastic bag, close it with tape or
twist ties and dispose of properly.
11) Remove protective clothing and work shoes in the work area to avoid carrying dust into the rest of the
dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work
clothes. Wash hair and body thoroughly with soap and water.
ADDITIONAL SAFETY RULES FOR YOUR HEAT GUN
1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
2. Always allow the heat gun to cool before storing. The hot nozzle can cause damage.
3. Never attempt to use the heat gun to dry animals, clothing or hair.
4. Dot leave the heat gun unattended when in use.
5. This product is designed for light domestic use only—it is not designed for industrial purposes. Even though
every care has been taken to make the heat gun safe, accidents can happen. By following this simple safety
guide, you can avoid serious accidents.
6. Be aware that heat may be conducted to combustible materials that are out of sight.
7. Double Insulation. When servicing, use only identical replacement parts.
8. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Store indoors. Read
instruction manual before using.
9. If the supply cord is damaged, it must be replaced by special assembly available from a service agent.