ORbITAL JIgSAw wITh LASeR LINe - 054-8223-4
ORbITAL JIgSAw wITh LASeR LINe - 054-8223-4
9
10
Know your orbital jigsaw with laser line
8
1
2
3
4
5
7
6
16
14
12
11
10
13
15
17
9
No.
Description
No.
Description
1
Variable speed switch
10
hex key storage
2 “Lock-on
”
button
11
hex key
3
Laser line on/off switch
12
Cord guard
4
Laser aperture
13
Saw blade storage
5
blade guard/chip deflector
14
Vacuum adaptor
6
Slot for blade assembly
15
4-position selection lever
7
Straight-edge guide locking knob
16
Tilting shoe
8
Straight-edge guide
17
blade roller guide
9
Trigger switch
Package contents
Jig saw, wood-cutting blade, hex wrench, straight edge guide, dust port, instruction manual
• Never cut more than one piece at a time. Do not stack more than one workpiece on the
worktable at a time.
• Avoid awkward operations and hand positions where a sudden slip could cause your
hand to move into the blade.
• Never reach into the cutting path of the blade.
• Blade guide rollers must support the blade when cutting. The rollers must rest against the
back edge of the blade.
The only cutting operation where rollers do not support the blade is the
scrolling mode. when scrolling, the blade must swivel as it is guided to follow scroll patterns. Always
move the base back and the blade guide up and back away from blade in scrolling mode.
WARNING!
To reduce the risk of injury, the user must read the Instruction Manual.
applications
This jigsaw should only be used to cut wood, particle board and thin metal sheets. Use the hex key that
is stored in the hex key storage area to make adjustments to the shoe of the jigsaw or to install blades.
Des
Cri
Pti
On
sa
Fet
Y
gU
iD
elines
