headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
14
model no. 054-7520-2 | contact us 1-800-689-9928
LED WORKLIGHT
(fig 4)
The LED worklight, located on the base of the
cordless drill/driver, will illuminate when the trigger
switch is depressed, and will automatically turn
off a while after the trigger switch is released.
This provides additional light on the surface of the
workpiece for operation in lower light situations.
ELECTRIC BRAKE
To stop the tool, release the trigger switch and allow
the chuck to come to a complete stop. The electric
brake quickly stops rotation. This feature engages
automatically when you release the trigger switch.
KEYLESS CHUCK
(fig 5)
The arrows on the chuck indicate the direction of
rotation of the body of the chuck to: tighten or open
the jaws of the chuck on the drill bit.
INSTALL THE BIT HOLDER
(fig 6)
1. Remove the battery from the tool.
2. Align the rib of the bit holder with the hole on the
base of the drill/driver.
3. Insert the screw (included) and tighten the screw
securely with a screwdriver (not included). The bit
holder can be positioned on either side of the tool.
REMOVE THE BIT HOLDER
(fig 6)
1. Remove the battery from the tool.
2. Use a screwdriver (not included) to loosen the screw that attaches the bit holder to the drill/driver.
3. Remove the screw and the bit holder.
OPERA
TING INSTRUCTIONS
NOTICE:
The worklight is for lighting the immediate work surface and is not intended to be used as a flashlight.
fig 4
LED
worklight
fig 5
Keyless
chuck
Open
Tighten
fig 6
Screw
Bit holder