headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
13
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
OPERA
TING INSTRUCTIONS
NOTE:
• To prevent gear damage, always allow the drill/driver to come to a complete stop before changing the direction of rotation.
• The drill/driver will not run unless the direction-of-rotation selector is engaged fully to the left or right.
TURN THE TOOL ON/OFF
(fig 2)
To turn the drill/driver ON, depress the variable-
speed trigger switch. To turn it OFF, release the
variable-speed trigger switch.
VARIABLE SPEED
(fig 2)
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
DIRECTION-OF-ROTATION SELECTOR
(FORWARD/CENTRE-LOCK/REVERSE)
(fig 2, 3)
The direction of rotation of the bit is reversible and is
controlled with a selector located above the trigger
switch. With the drill/driver held in normal operating
position:
Position the direction-of-rotation selector to the left
of the tool for forward rotation.
Position the direction-of-rotation selector to the right of the tool for reverse rotation.
Position the direction-of-rotation selector in the centre to lock the tool off.
fig 2
Direction-
of-rotation
selector
Variable-speed
trigger switch
fig 3
Forward
Reverse