MasterCraft 054-7121-2, Инструкция по эксплуатации

Страница: 8 / 14

20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2 20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
13 14
Installing the side handle
(fig 3)
The side handle is used to guide and balance the
tool and can be threaded into the front housing
on either side of the tool, depending on personal
preference and comfort. Use the side handle for
safe control and ease of operation.
WARNING!
Failure to remove the battery pack
from the cordless angle grinder
when assembling parts, making adjustments, or changing application tools could result in
accidental starting and cause serious injury.
1. Remove the battery pack from the angle grinder.
2. The side handle may be installed on the right side or the left side of the tool. Thread the side handle
into the desired operating position.
3. Securely tighten the side handle by turning it clockwise.
ON/OFF switch
(fig 2)
WARNING!
Firmly grasp the body of the tool and
the side handle before starting.
The tool is switched “ON” with the switch button
located at the top of the motor housing. The switch
can be locked in the “ON” position, a convenience
for long grinding operations. The symbol “O” on
the motor housing indicates OFF; the symbol “l” indicates ON.
1. To turn the tool ON without locking it, slide the switch button forward by applying pressure only at
the rear portion of the button.
2. To unlock the switch and turn the tool OFF, press and release the rear portion of the switch button; it
will return to the OFF position automatically.
For continuous operation:
1. Push the switch button forward to the ON position and press the front of the button down until the
switch clicks into position.
2. To unlock the switch and turn the tool OFF, press the rear of the button.
OPERA
TING INSTR
UCTIONS
fig 3
OPERA
TING INSTR
UCTIONS
fig 2
Switch button