manualshive.com logo in svg

MasterCraft 054-6988-6, Инструкция по эксплуатации, Страница: 8 / 30

Поделиться
Скачать
MasterCraft 054-6988-6 Скачать руководство пользователя страница 8

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

model no. 054-6988-6  |  contact us 1-800-689-9928

8

 

BPM ...............   Beats per minute

 

 ..............  

WARNING – To reduce the risk of injury, user must read instruction manual

.

 

 ..............   WARNING – To reduce the risk of injury always wear eye protection.

 

 ..............   WARNING – To reduce the risk of injury always wear ear protection.

• 

Use clamps or another practical way to secure and support the workpiece to a stable 

platform. 

Holding the work by your hand or against the body leaves it unstable and may lead to 

loss of control.

• 

Always wear a dust mask and ear protection when using this power tool.

• 

Only use cutters that are designed for this router

.

• 

Only use sharp cutters that are not chipped or cracked

. Blunt cutters will cause stalling.

• 

Secure small pieces of wood firmly before working.

 Never hold a workpiece in your hand.

• 

Keep your hands away from the cutting area.

• 

Before starting the router, check that the cutter is firmly positioned and secured in the collet

.

• 

Do not exceed the maximum indicated rotation speed of the cutter.

• 

Routing operations must always be performed against the direction of rotation  

(cutter-rotation) of the cutter.

• 

The cutter must be running at full speed before it is lowered to the workpiece.

• 

When operating the router, always hold the handles firmly with both hands.

 Always 

ensure that your footing is secure when working.

• 

Be prepared for the reaction torque of the router, particularly if the cutter becomes 

jammed in the workpiece.

• 

When a plunge-cutting operation is completed, release the handle to allow the router 

to slide back to its initial position.

• 

Familiarize yourself with your working area, and be alert for possible hazards that you 

may not hear due to the noise of the router.

• 

Allow sufficient run-down time for cutter after turning the router off.

 Wait for it to come 

to a complete stop before removing it from the workpiece.

• 

Never slow the router down with your hands.

• 

Do not touch the cutter immediately after operation. 

It may be extremely hot and could burn you.

• 

Never stop the router by applying lateral pressure to the cutter.

• 

Do not force the router.

 It will do a better job if you allow it to work at its intended speed.

• 

Avoid cutting nails and screws.

 Inspect timber before cutting, and remove all nails and screws.

• 

Protect your hearing. Wear appropriate personal hearing protection during use.

 Under 

some conditions and duration of use, noise from this product may contribute to hearing loss.

SAFETY GUIDELINES

Содержание 054-6988-6































Отзывы:

Нет отзывов