MasterCraft 054-6938-6, Инструкция по эксплуатации, Страница: 11 / 28

ROUTER TABLE - 054-6938-6
10
• The label on your tool may include the following symbols. The symbols and their
definitionsare as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual .
Unpacking
WARNING!
If any parts are missing, DO NOT attempt to assemble, install, or use the router table until
the missing parts have been found or replaced and the router table has been properly and
correctly assembled according to this Instruction Manual.
To simplify handling and to minimize any damage that may occur during shipping, the router table
comes partially assembled.
Separate all parts from the packaging materials, and check each part against Contents below to ensure
that all parts have been included. Do this before discarding any of the packaging material.
SAFETY GUIDELINES