background image

headline bars

continuation tabs

notes

warnings

headline bars

continuation tabs

notes

warnings

8

model no. 054-4289-2  |  contact us 1-800-689-9928

• 

Hold power tools by insulated gripping surfaces when performing an operation where 

the tool may contact hidden wiring or its own cord. 

Contact with a “live” wire may make 

exposed metal parts of the power tool “live” and could give the operator an electric shock.

• 

Use clamps or another practical way to support and secure the workpiece to a stable 

platform. 

Holding the work by hand or against your body is unstable and may lead to loss of 

control. 

• 

Keep hands away from cutting area. Do not reach under the material being cut.

 The 

proximity of the blade to your hand is hidden from your sight.

• 

Do not use dull or damaged blades.

 Bent blade can break easily or cause kickback.

• 

Never touch the saw blade immediately after use. 

It may be hot after prolonged use.

• 

Always wear safety goggles or eye protection when using this tool. 

Use a dust mask or 

respirator or connect the tool to an external dust vacuum if the cutting generates a great amount 
of dust.

• 

Protect your hearing. 

Wear appropriate personal hearing protection during use. Under some 

conditions noise from this product may contribute to hearing loss.

• 

The label on your tool may include the following symbols. The symbols and their 

definitions are as follows:

 

V .....................   Volts

 

A .....................   Amperes 

 

Hz ...................   Hertz

 

W ....................   Watts

 

min .................   Minutes

 

 .................   Alternating current

 

 .............   Direct current

 n

...................   No-load speed

 

 ...............   Class II Construction

 

…/min ...........   Revolutions or reciprocation per minute

 

 ...............   Grounding terminal

 

BPM ...............   Beats per minute

 

SPM ...............   Strokes per minute

 

 ..............  

WARNING – To reduce the risk of injury, user must read instruction manual

.

 

 ..............   WARNING – To reduce the risk of injury always wear eye protection.

 

 ..............   WARNING – To reduce the risk of injury always wear ear protection.

SAFETY GUIDELINES

Содержание 054-4289-2























Отзывы: