headline bars
continuation tabs
notes
warnings
8
model no. 054-4281-8 | contact us 1-800-689-9928
SAFETY GUIDELINES FOR CORDLESS BAND SAW
DANGER!
Keep hands away from cutting area and blade. Keep your second hand on the auxiliary
handle. If both hands are holding the saw, the blade cannot cut them
.
•
To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
BATTERY PACK
CHARGER
054-3124-0, 054-3125-8
054-3126-6
•
Hold power tool by insulated gripping surfaces, when performing an operation where
the cutting accessory may contact hidden wiring.
Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and could give the operator an
electric shock.
•
Use clamps or another practical way to secure and support the workpiece to a stable
platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss
of control.
•
Secure material before cutting.
Never hold a workpiece in your hand or legs. Small or thin
material may flex or vibrate with the blade, causing loss of control.
•
Do not use a damaged blade.
Before each use inspect the blade for cracks, chips or other
damage. Replace a damaged blade immediately.
•
Do not apply cutting lubricants or oil to the blade of this tool.
Lubrication will cause blade
to slip within tool.
•
Wipe excess oil from workpiece before cutting.
Lubrication will cause blade to slip within
tool.
•
Hold the saw firmly to prevent loss of control.
Figures in this manual illustrate typical hand
support of the saw.
•
Keep hands away from cutting area.
Do not reach under the material being cut. The proximity
of the blade to your hand is hidden from your sight.
•
Keep hands from between the blade and material guide.
Always start cut with workpiece
on the material guide. When tool starts work will be pulled to the material guide and can pinch
your fingers.
•
Before starting to cut, turn tool “ON” and allow the blade to come to full speed.
Tool can
chatter or vibrate if blade speed is too slow at beginning of cut.
•
Do not touch the blade or the workpiece immediately after operation.
Blade and
workpiece will be hot.
•
When removing the blade from the tool avoid contact with skin and use proper
protective gloves when grasping the blade or accessory.
Accessories may be hot after
prolonged use.
SAFETY GUIDELINES
Содержание 054-4281-8
Страница 2: ...continuation tabs notes warnings...
Страница 22: ......
