MasterCraft 054-4281-8, Инструкция по эксплуатации

Страница: 12 / 22

headline bars
continuation tabs
notes
warnings
12
model no. 054-4281-8 | contact us 1-800-689-9928
TO ATTACH THE BATTERY PACK
(fig 1)
1. Align the raised rib on the battery pack with the
grooves of the saw, and then attach the battery pack to
the saw.
2. Make sure that the battery latches securely into place.
TO DETACH THE BATTERY PACK (fig 1)
1. Depress the battery release button located on the front
of the battery pack to release the battery pack.
2. Pull the battery pack out and remove it from the tool.
REMOVING AND INSTALLING SAW
BLADES
To remove the saw blade (fig 2 & 3)
1. Detach the battery pack from the saw.
2. Unscrew the screws on the cover, and then remove the
cover, as shown in Figure 2.
3. Rotate the quick-release knob clockwise until it stops;
this will release the tension on the blade.
4. Turn the saw over and place it on a workbench or table
with the motor housing to the right.
5. Carefully remove the blade from the saw.
ASSEMBL
Y INSTRUCTIONS
fig 2
fig 3
NOTICE:
When attaching the battery pack to the tool, make sure that the raised platform on the pack aligns with the
grooves on the tool and that the latches snap properly into place. Improper assembly of the battery pack can cause damage to
internal components.
WARNING!
• To prevent personal injury, always remove the battery pack from the tool before installing or removing the saw blade.
• To prevent personal injury, always wear gloves when installing or removing the saw blade.
• When removing the blade, tension may be released and the blade may spring free. Saws blades are sharp. Use care in
handing them.
FPO
fig 1
Attach Detach
Release
button