MasterCraft 054-3182-0, Инструкция по эксплуатации

Страница: 5 / 11

CORDED IMPACT WRENCH - 054-3182-0 CORDED IMPACT WRENCH - 054-3182-0
7 8
• Check the torque with a torque wrench.
The proper fastening torque may differ depending on
the type of size of the bolt.
• Use thick, cushioned gloves and limit the exposure time by taking frequent rest periods.
Vibration caused by hammer-drill or Impact wrench action may be harmful to your hands and arms.
• Do not use this tool as a drill. Tools equipped with shut-off clutches are not designed for drilling
applications. The output drive can shut off automatically and without warning.
• Be careful when driving long screws. There is a risk of the tool sliding off the fastener head,
depending on type of socket or bit used. First test the fastening time of a fastener and pay attention
during the screw-driving process to ensure you do not injure yourself if the tool bit or socket slides
off of the fastener.
• Bits, sockets, and tools get hot during operation. Wear gloves when touching them.
• Wear ear protection. Exposure to noise can cause hearing loss.
Contents:
Impact wrench and instruction manual
WARNING!
Remove the impact wrench from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
SAFETY GUIDELINES
Safety guidelines for impact wrench
• Hold power tools by insulated gripping surfaces when performing an operation where the
tool may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual .
• Do not use the power tool with a damaged cord. Do not touch the damaged cord; turn off the
tool and pull the plug from the outlet if the cord is damaged while working. Damaged cords increase
the risk of an electric shock.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more
securely than it is by hand.
• Always wait until the power tool has come to a complete stop before placing it down.
The
tool insert can jam and lead to loss of control over the power tool.
• Check the socket carefully for wear, cracks or damage before installation on the hammer
drill.
• Always be sure that you have a firm footing. Be sure that no one is below you when using the
tool in high locations.
SAFETY GUIDELINES