MasterCraft 054-3176-6, Инструкция по эксплуатации

Страница: 7 / 12

20V max* LIThIUM-ION CORdLeSS hIgh-TORqUe IMpACT wReNCh - 054-3176-6 20V max* LIThIUM-ION CORdLeSS hIgh-TORqUe IMpACT wReNCh - 054-3176-6
11 12
Led worklight (fig 4)
The Led worklight, located on the base of the
impact wrench will illuminate when the trigger
switch is depressed. This provides additional light
on the surface of the workpiece for operation in
lower-light areas. The Led worklight will turn off
when the trigger switch is released.
installing and removing the
socket
(fig 5)
Always use the correct size socket for bolts and
nuts. An incorrect socket will result in inaccurate
and inconsistent fastening torque and/or damage
to the bolt or nut.
1. Lock the trigger switch by placing the direction-
of-rotation selector in the OFF (centre) position.
2. To install the socket, push it onto the output
drive of the tool until it locks into place.
3. To remove the socket, simply pull it off.
trigger switch
(fig 2)
1. To turn the impact driver ON, depress the trigger
switch.
2. To turn it OFF, release the trigger switch.
Variable speed (fig 2)
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
direction-of-rotation selector
(forward/centre lock/reverse)
(fig 3)
The direction of bit rotation is reversible, and is
controlled by a selector located above the trigger
switch. with the impact wrench held in normal
operating position:
position the direction-of-rotation selector to the
left of the tool for forward rotation.
position the direction-of-rotation selector to the right of the tool for reverse rotation.
position the switch in the OFF (centre lock) position helps reduce the possibility of accidental starting
when not in use.
NOTICE: To prevent gear damage, always allow the impact wrench to come to a complete stop before
changing the direction of rotation.
NOTICE:
The impact wrench will not run unless the direction-of-rotation selector is engaged fully to the
left or right.
opera
ting
instr
uC
tions
opera
ting
instr
uC
tions
fig 3
Forward Reverse
fig 2
direction-
of-Rotation
Selector
Variable-
Speed
Trigger
Switch
fig 4
Led worklight
fig 5
Socket
Output drive