MasterCraft 054-3126-6 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 80

MasterCraft 054-3126-6 Скачать руководство пользователя страница 50

20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0

9

Battery protection

To protect the battery pack from damage and prolong its life, the battery pack’s circuitry will turn off
the battery pack if it becomes overloaded or if the temperature becomes too high during use. This may
happen in extremely high torque, binding and stalling situations. The battery pack will begin normal
operation when it cools down.

The Fuel Gauge will display four flashing LED lights if the circuitry detects a momentary overload.
You can conveniently reset the battery pack by releasing the power tool trigger switch. Press the Fuel
Gauge button again to display the remaining charge.

NOTE:

If the Fuel Gauge continues to flash four LED lights after reset, place the battery pack on the

charger to evaluate the battery pack condition.

NOTE:

A significantly reduced run time after fully charging the battery pack indicates that the battery

pack is near the end of its usable life and must be replaced.

Cold weather operation

When the battery pack is very cold, it may “pulse” for the first minute of use to warm itself. Put the
battery pack on a tool and use the tool in a light application. After about a minute, the battery pack will
have warmed itself and will operate normally.

When to charge the battery pack

NOTE:

This Lithium-Ion battery pack is shipped partially charged. Before using it the first time, fully

charge the battery pack.

The Lithium-Ion battery pack can be charged at any time and will not develop a “memory” when
charged after only a partial discharge. It is not necessary to run down the battery pack charge before
recharging. Remove the battery pack from the tool when it is convenient for you and your job.

1. Use the Fuel Gauge to determine when you need to recharge the battery pack.

2. You can “top-off” your battery pack’s charge before starting a big job or long period of use.

3. Due to Lithium-Ion’s fade-free properties, the only time it is necessary to charge the Lithium-Ion

battery pack is when the pack has reached the end of its charge. To signal the end of charge, power
to the tool will drop quickly. Charge the battery pack as needed.

OPERA

TING INSTR

UCTIONS

«
...
48
49
50
51
52
...
»

Содержание 054-3126-6

















































































Отзывы:

Нет отзывов