MasterCraft 054-3126-6 Скачать руководство пользователя страница 24

Страница: 24 / 80

20V max* LITHIUM-ION COMPACT CORDLESS IMPACT WRENCH - 054-3121-6

SAFETY GUIDELINES

Work area safety

• Keep the work area clean and well lit.

Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust.

Power tools create sparks, which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool.

Distractions can cause

you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching

outlets will reduce the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase

the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep the cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use a ground-fault circuit

interrupter (GFCI) protected supply.

Use of a GFCI reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool.

Do not use the tool while tired or under the influence of drugs, alcohol, or medication.

moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions,
will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position before connecting

to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools

with your finger on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key

left attached to a rotating part of the power tool may result in personal injury.

Содержание 054-3126-6

















































































Результаты поиска

Содержание 054-3126-6

Отзывы:

Похожие инструкции для 054-3126-6

Бренды по названию

Популярные бренды

MasterCraft 054-3126-6, Инструкция по эксплуатации

Результаты поиска

Содержание 054-3126-6

Отзывы:

Похожие инструкции для 054-3126-6

Бренды по названию

Популярные бренды