7
4V lithium-ion compact screwdriVer - 054-2500-0
safety guidelines
• Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical help.
Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
Safety guidelines for cordless screwdriver
• Hold power tools by insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord.
Contact with a “live” wire may make
exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Do not use dull or damaged bits and accessories.
• Only connect the power unit to a 120VAC supply.
• Before screwing into a wall, check with a metal/voltage detector to be sure you are not
driving into an electricity, gas, or water supply line.
• Avoid frequent stalling when operating, as this could damage the tool.
• If the tool stalls, release the trigger immediately, reverse the direction of rotation and
slowly squeeze trigger to back out the bit.
• Do not expose the tool and power unit to rain; also protect them from moisture.
• For best results, your battery tool should be charged in a location where the tem-
perature is more than 0°C (32°F) but less that 40°C (104°F).
Do not store outside or in
vehicles.
• Do not charge the tool in a damp or wet location.
Following this rule will reduce the risk of
electric shock.
• Do not operate the power unit if it has received a sharp blow, been dropped, or
otherwise damaged in any way;
take it to a qualified service person. Disconnect the power
unit from the power supply when not in use. Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
• This power unit is intended to be correctly orientated in a vertical or floor mount posi-
tion.
Safety guidelines for charger
• The tool and its charger are specifically designed to work together.
Do not attempt to
charge the tool with any other type of charger. Do not attempt to charge any other type of
cordless tool with the tool charger.
• Only use the tool with the charger listed:
SH-DC050300.