MasterCraft 054-2436-4, Инструкция по эксплуатации

Страница: 13 / 20

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
13
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
INFLATING USING HIGH PRESSURE HOSE (INFLATOR FUNCTION)
INFLATING CAR OR BICYCLE TIRES
(fig 4 - fig 5)
1. Remove the tire inflator and high pressure hose from
its storage area.
2. CAR TIRES:
Remove tire’s valve cap. Move tire inflator’s lever
straight up and push it over tire’s valve stem. Move
the lever down to lock the tire inflator.
3. BICYCLE TIRES:
a. Schrader valve: Remove the tire valve cap. Move the
tire inflator lever straight up and push it over the tire
valve stem. Move the lever to the locked position.
b. Presta valve: Remove the tire valve cap. Open the
valve tip. Thread the presta valve adaptor on to the
valve stem. Move the tire inflator lever straight up
and push it over the presta valve adaptor. Move the
lever to the locked position.
4. a. Attach the battery pack to the tool and slide the
power selector from the middle place to the left side
to use the DC power source.
b. Insert an extra power cord onto the AC adaptor, connect the power plug to the 120V alternating current
power source, and then slide the power selector from the middle place to the right side.
5. Slide the pressure selector to the left side first. Select the pressure unit by pressing the “+” “-” buttons
simultaneously until the desired unit is displayed (PSI, BAR or KPA). Set the pressure by pressing the “+”
or “–” button until the proper pressure is displayed.
6. To start inflating, press the on/off switch.
7. To stop inflating, press the on/off switch again.
8. When finished, move tire inflator’s lever straight up and then remove the tire inflator.
9. Unplug or remove the battery pack after use.
fig 4
OPERA
TING INSTRUCTIONS
WARNING!
• To prevent serious injury and death from explosion, do not overinflate. Do not leave the tool unattended while
operating.
FPO
NOTICE:
Make sure the tire inflator is firmly locked in place before starting inflation.
fig 5
Lever
Tire inflator
Screen
+ button
- button
Power selector Pressure selector
On/off
switch
Lock
Open