MasterCraft 054-2436-4, Инструкция по эксплуатации

Страница: 12 / 20

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-2436-4 | contact us 1-800-689-9928
12
OPERATING INSTRUCTIONS
ATTACH THE BATTERY PACK (fig 1)
1. Align the raised rib on the battery pack with the
grooves on the back side of the tool, then slide the
battery pack onto the tool.
2. Ensure that the battery
-
release button on the
battery pack snaps into place and the battery pack
is secured to the tool before beginning operation.
REMOVE THE BATTERY PACK (fig 1)
1. Press the battery - release button to release the battery pack.
2. Pull the battery pack out to remove it from the tool.
USE THE AC ADAPTOR (fig 2)
The inflator can also be connected to the 120V AC
power source. Pull out the cap, insert an extra power
cord onto the AC adaptor, and then you can use
the power source. The extension cord should have
a suitable plug-receptacle to match with the AC
adaptor. The types of the extension cord include SW,
SOW, STW, STOW, SJW, SJOW, SJTW, SJTOW, etc..
Recommended sizes of extension cords:
Tool’s ampere rating Volts
Total length of cord in feet
Cord size in AWG. (minimum)
25’
50’ 100’ 150’
0-6
120 V~
18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12 Not recommended
LIGHT (fig 3)
1 Turn the light on by pressing the light switch.
2. Turn the light off by pressing the light switch again.
OPERA
TING INSTRUCTIONS
fig 3
fig 1
Battery-
release
button
Light
Light switch
fig 2
AC
adaptor
Cap