MasterCraft 054-0370-0, Инструкция по эксплуатации

Страница: 21 / 28

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
21
GUIDE BAR MAINTENANCE ( fig. 11)
The bar should be cleaned every day of use and
checked for wear and damage. Feathering or burring
of the bar rails is a normal process of bar wear. Such
faults should be smoothed with a file as soon as they
occur. A bar with any of the following faults should
be replaced.
• Wear inside the bar rails that permits the chain
to lay over sideways.
• Bent guide bar.
• Cracked or broken rails.
• Spread rails.
In addition, the guide bar has a sprocket at its tip. The sprocket must be lubricated weekly with a
grease syringe to extend the guide bar life. Use a grease syringe to lubricate weekly with chain oil by
means of the lubricating hole. Turn the guide bar and check that the lubrication holes and chain groove
are free from impurities.
TRANSPORTING AND STORING
1. Do not store or transport the pole saw when it is running. Always remove the battery pack before storing or
transporting.
2. Always place the chain sheath on the guide bar and chain before storing or transporting the pole saw. Use
caution to avoid the sharp teeth of the chain.
3. Clean the pole saw thoroughly before storing. Store the pole saw indoors, in a dry place that is locked and/or
inaccessible to children.
4. Keep away from corrosive agents such as garden chemicals and de-icing salts.
FPO
WARNING!
• Before cleaning or performing any maintenance, remove the battery pack.
• Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc., come into contact with
plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or
cause damage to the product.
• Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing
dust. If the operation is dusty, also wear a dust mask.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
MAINTENANCE
fig. 11
Lubricating hole
Sprocket in
guide-bar tip