Masterclock CLDNTD12, Руководство пользователя

Страница: 7 / 36

Masterclock www.masterclock
.com
7
Mounting
The CLDNTD12 digital time display is designed for wall mount. Power and low voltage signal wiring
should be installed according to local electrical codes, so to access the back of the clock.
Do not route power or signal cables between the case and the wall (along the exterior of the
wall), which may pinch the power or signal cable and create a hazardous condition.
Wall Mount Bracket
A wall mounting bracket is supplied which has been designed to fit on either a standard 2”x 4” or
4” x 4” conduit box. Mount the bracket on the wall/conduit box, attach the power cord and CAT5
Ethernet patch cable and secure the CLDNTD12 to the bracket using the supplied retaining screws.
See page 7 for a plan view with measurements.