LIGHTING INSTRUCTIONS
1.
Read all instructions and warnings before lighting
2.
Open lid during lighting.
3.
Turn gas control knob to OFF, turn LP cylinder valve on.
4.
Push control and turn to left to ‘IGNITE’ and light.
5.
Repeat up to three times if necessary.
6.
If ignition does not take place immediately, wait 5 minutes and then
match light. See Page 7.
5
8
• ALWAYS turn gas OFF at the gas cylinder valve prior to
inspecting parts.
• ALWAYS empty Drip Tray, located in back of unit, after to each use.
• DO NOT obstruct flow of combustion and ventilation. Keep the
ventilation opening(s) of the cylinder enclosure clear of debris.
The cylinder supply system must be arranged for vapor withdrawal.
• ALWAYS allow your grill to cool completely before handling.
• When grill is not in use, the gas must be turned off at the supply
cylinder.
• ALWAYS disconnect your gas cylinder after using your grill.
• Clean grill, including special surfaces such as grill racks with
cleaning agents. Wipe outside of unit with a damp rag.
(Do Not Use Oven Cleaner)
• ALWAYS cover and store your grill in a protected area.
• Gas cylinders must be stored outdoors out of the reach of
children and must not be stored in a building, garage or any other
enclosed area.
• Always store gas cylinder upright and in areas where
temperatures won’t exceed 125° F (52˚C).
• Indoor storage of grill is permissible only if the cylinder is
disconnected and removed.
• With normal use, some bronzing may occur.
SAFE STORAGE & MAINTENANCE
REGULATOR TO GAS CYLINDER VALVE CONNECTION
GAS CONTROL VALVE OPERATIONS
OFF
On
CONNECTION
TO GAS CYLINDER
CLOCKWISE
COUNTER
CLOCKWISE
WARNING
Extinguish all open flames
before connecting the
regulator to the gas cylinder.