Masterbuilt Sportsman Elite 20076115, Инструкция по сборке, уходу и использованию

Страница: 15 / 20

14
r
, to ensure proper installation.
.
To replace batteries:
• Slide belt clip to the left to remove.
• Press tab down on battery cover and pull out.
• Install 2 “AAA” Alkaline batteries. Check positive (+) and negative (-) symbols, on the case and
battery
• Replace the battery cove
• Remove batteries before storing remote control.
To test frequency range:
• Turn unit on.
• Use remote to turn light on and off as you move away from unit.
• Remote control is out of frequency range when light will no longer turn on and off.
IMPORTANT
• Do not leave remote control exposed to sunlight for prolonged periods of time.
• Remote control has frequency range of up to 100ft (30m).
• T est frequency range before and during use.
TROUBLESHOOTING
If the remote is not working properly or not interfacing correctly with the controlle r , it may be due to
weak batteries, batteries being incorrectly installed or the remote is not correctly linked to controlle r.
Possible solutions
• Replace batteries and install according to image in battery housing.
• Link remote and controller by:
a. T urn Controller & Remote “OFF”.
b. Press and HOLD “SE T TEMP” on controller for 3 seconds.
c. On the Remote press “MEA T PROBE”, “LIGHT”, “MEA T PROBE”, “LIGHT” ( all buttons must
be pressed within 5 seconds of each other
) A short beep will occur after each button press.
• Keep batteries away from small children. If battery is swallowed consult a physician immediately .
• Be sure to insert batteries correctly. Improper installation may result in leaks and/or
possible explosion.
• Do not dispose of batteries in fi re.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh,etc) batteries.
*Batteries not
included
( Hold for 2 seconds for wireless remote function )
HOW TO USE CONTROL PANEL & REMOTE CONTROL
CAUTION