background image

25

  Masterbuilt 2-Year Limited Guarantee/Warranty

WHAT IS NOT COVERED:

 These guarantees are based on normal and reasonable domestic use and good 

maintenance of the product. The warranty does not apply to additional or unforeseen damage or breakage, or 

for damage caused by: transport; drop; wrong assembly; incorrect support; attempts to support the product 

by means other than an approved Masterbuilt accessories or solid, non-flammable surface under the base; 

commercial use; amendments; changes; negligence; abuse; improper care / maintenance; hazards on the 

road; normal and reasonable wear; or natural disasters.

 

The warranty does not apply to scratches, dents, shards, hairline cracks, the appearance of small cosmetic 

cracks in the outer layer of glaze that do not affect the operation of the product.

 

Buying a Masterbuilt product or related items through unauthorized dealers, unauthorized retail channels and 

unauthorized third parties voids the warranty.

 

Note: 

When consumers buy something from an unauthorized source, even if it works as a lawful company 

and offers products in unopened boxes with blank warranty cards (but is an unauthorized reseller), they sell 

second-hand products according to the legal definition.  If someone buys something from an unauthorized 

reseller or trader, or from an unauthorized online reseller, it almost always concerns products without a 

manufacturer’s warranty, regardless of any statements or claims made by the seller. This is the standard 

policy of many brands and companies, not just Masterbuilt.

 

COVERAGE DATE:

 

Warranty coverage commences when a product purchased from an authorized dealer by the 

original purchaser and owner is registered with masterbuilt.com as required by these warranty conditions. A 

valid proof of purchase from an authorized dealer is required to file a warranty claim.

 

COVERAGE ACCORDING TO THE GUARANTEE:

 Original parts of Masterbuilt which are found to contain material 

and construction faults and which are covered by a valid and registered warranty will be replaced or repaired 

free of charge at Masterbuilt’s discretion, subject to the terms and conditions of this warranty.

 

WARRANTY CLAIM PROCEDURE: 

For warranty support, please contact the authorized dealer from whom you 

purchased the item.

 

For products purchased in countries outside Europe, warranty claims are handled by an authorized dealer or 

distributor in the country where they were purchased. Consult the INTERNATIONAL section of the masterbuilt.

com website to find the recognized international Masterbuilt distributor in your specific region. Warranty 

claims must be submitted through an authorized dealer or distributor in the country where the item was 

originally purchased. Do not submit parts for a warranty claim before contacting an authorized dealer or 

distributor, as in some cases there is no need to return the guaranteed part.

Содержание MPS 230S





























Отзывы: