All the products and the specific technicals contained in this document are subjects to variations without any warning.
MASTER declares that the device meets the principal requirement and the other regulations of the directive 1999/5/CE.
The declaration of conformity of the above products is available on the web site
section «Conformity products».
http://www.mastermotion.eu/it-IT/download,
6. Device Scheme
L
0
N
AN
C
P
7
Km/h
40
Km/h
-
+
WIND THRESHOLD
ADJUSTING TRIMMER
KEY RESET
IDENTIFICATION
LABEL
PROTECTION
FUSE
L
0
N
AN
C
P
-
+
common
motors
ground
contact
M1
POWER
SUPPLY
L
N
Manual
control 1
Manual
control 2
IN ORDER TO CHECK THAT CONNECTIONS HAVE BEEN CARRIED OUT AS IN THE SCHEME, BRING THE AWNING TO THE INTERMEDIATE POSITION AND ROTATE THE SENSOR
BLADES SINCE WIND ALARM BEGINS. THE AWNING MUST MOVE UPWARD. IF THE AWNING MOVES DOWNWARD REVERSE THE OPERATION WIRES OF MOTOR OR MOTORS.
IT IS POSSIBLE TO EXIT FROM WIND ALARM WITHOUT WAITING 8 MINUTES, KEEP HOLD KEY «RESET»SINCE RED LED SWITCHES OFF.
SYSTEM CHECK
required
7. Electric Connection Scheme
WIND ALARM LED SIGNALLING
P
P
M2
WIND P DUO rev.02 dated 30.08.12
1
2
3
4
RAIN ALARM LED SIGNALLING
RAIN SENSOR
Wind Sensor
mod. X15C
Rain Sensor
mod. X11
For rain sensor connecting :
1
1
terminal (WIND P) with terminal (X11)
terminal (WIND P) with terminal (X11)
terminal (WIND P) with terminal (X11)
terminal (WIND P) with terminal (X11)
2
2
3
3
4
4
1 2 3 4
1
2
ON
1
2
3
4
RAIN SENSOR
