Master TS 3 AI, Руководство оператора

Страница: 7 / 24

REGULAR CLEANING AND INSPECTION
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
2
GB
REGULAR CLEANING AND
INSPECTION
Before storing the heater for long periods of time,
clean it thoroughly. Always place it in a dry room and
protect it from dust. Before reusing the heater, check
the conditions of the power cable. When in doubt, call
the Technical Assistance.
The heater should always be inspected once a year.
The heater should be serviced by qualified
technicians authorized by the manufacturer.
TROUBLESHOOTING
WARNING: The heater has an internal protection sistem and stops when it overturns.
FAULT CAUSE CORRECTIVE ACTION
The heater doesn't start Incorrect position
Faulty connections (interrupted)
Faulty lamps Place the heater in the correct
position on its feet.
Disconnect the plug and inspect
the connections
Replace
TECHNICAL SPECIFICATIONS
Power supply 220/240V – 50Hz
Heating power 1 800W
Heating power 2 1600W
Maximum heating power 2400W
Maximum absorption 10,5A