NEVER LEAVE HEATER UNATTENDED WHILE BURNING, CONNECTED
TO A POWER SOURCE, OR WHILE CONNECTED TO A FUEL SOURCE.
© 2019 Pinnacle Climate Technologies, Inc.
Cabinet Heater User's Manual
5
RISK OF FIRE! ALWAYS LOCATE HEATER ON A STABLE AND LEVEL
SURFACE!
WARNING
SPECIFICATIONS
Model #
MH-18-PNCH-A
BTU
6,000 / 12,000 / 18,000
Fuel Consumption (lb./hr)
0.29 /0.57 / 0.86
Heat Settings
3
Maximum Operating Hours
69 / 35 / 23
Required Cylinder Lbs.
20
Fuel Type
Use ONLY 20 lb. LP Gas
Cylinder: 18" x 12.25"
Heating Area (Ft.
2
)
150 / 300 / 450
Specifications subject to change without notice.
–
ALWAYS install the heater so that it is not directly
exposed to water spray, rain, dripping water, or
wind.
–
Use heater in accordance with all local codes
and with CSA 5.90 U.S. (5th Ed.) Infrared Patio
Heater.
–
This heater is shipped from the factory for use
with propane (LP) gas only. Do not convert
to any other gas. Installation must conform
to local codes, or in their absence, with the
standard for the Storage and Handling of
Liquefied Petroleum Gases ANSI/NFPA 58 and
the Natural Gas and Propane Installation Code
CSA B149.1.
–
Gas supply connections should be checked by
using a 50/50 soap and water solution. Never
use a flame to check for gas leaks.
–
Use only the regulator and hose assembly
provided with this heater. Inspect the
regulator/hose assembly prior to each use
of the heater. If there is excessive abrasion
or wear, or if the hose is cut, replace it with
the proper assembly shown in the parts list,
prior to using the heater. The replacement
hose assembly should follow manufacturer's
specification.
–
This heater is not for use on finished floors.
Minimum and Maximum Inlet Pressure
Model
MH-18-PNCH-A
Min.
5 PSI
Max.
Bottle Pressure
For use with propane
(LP) gas only.
WARNING
The hose assembly
shall be pro tected
from traffic, building
material and contact with hot surfaces both
during use and while in storage.
WARNING
SAFETY INFORMATION (CONT.)
