EN
Exercise Computer
SPECIFICATIONS:
TIME----------------------------------------------------00:00 - 99:59 MIN:SEC
COUNT---------------------------------------------------0 - 9999 TIMES
CALORIES------------------------------------------------0 - 9999 KCAL
STRIDES/MIN(REPS/MIN)(if have)--------------------------0 - 9999 TIMES/MIN
TOTAL COUNT(if have)------------------------------------0 - 9999 TIMES
PULSE(if have)------------------------------------------40 - 200 BEATS/MIN
KEY FUNCTION:
MODE/SELECT:
To select the function you want. Hold the key for 4 seconds to have all
function values reset(total reset).
SET
(if have): To input the target value by the key.
RESET/CLEAR
(if have): To let the value reset.
OPERATION PROCEDURES:
AUTO ON/OFF
: The monitor will be automatically shut off if there is no signal coming in for 4
minutes. The monitor will be auto-powered when starts exercise or press the key.
FUNCTION:
<1>.TIME(TMR)
Auto-memorize the workout time while exercising.
<2>.COUNT(CNT)
Accumulate the steps while exercising.
<3>.CALORIES(CAL)
Auto-memorize calories amount consumed while exercising.
<4>.STRIDES/MIN(SPD)
(if have). Display the steps per minute while exercising.
<5>.TOTAL COUNT(TOTAL)
(if have). Display the total counts while exercising.When the signal
input, it start the count up on the original data.The TOTAL COUNT can’t be reset(by RESET
key)except you replace battery once.
<6>.PULSE(PUL)
(if have). Display the user’s heart rate per minute while exercising. Remark:
You have to hold on reaction planks with both hands.
<7>.SCAN:
Automatically scan through each function between
①TIME②CALORIES③STRIDES/MIN(if have)④T-COUNT(if have)⑤PULSE(if have).
BATTERY:
If you see an improper display on the monitor, please replace the batteries to
have a good result. This monitor uses two “AA” or one “AAA” batteries or one
“1.5V” button battery. You can replace the batteries at the same time.
