NEVER LEAVE BLOWER UNATTENDED WHILE OPERATING OR
WHILE CONNECTED TO A POWER SOURCE
© 2018 Pinnacle Climate Technologies, Inc.
Low Profile Carpet Dryer User’s Manual
TROUBLESHOOTING GUIDE
Problem
Possible Cause
Solution
Motor does not run.
1. No power supply to the device.
2. Switch / knob not turned on.
3. Fan wheel blocked.
4. Air inlet or outlet is blocked.
5. Switch is broken.
6. Loose wiring.
1. Connect device, check fuse.
2. Turn knob on / press power
switch to ON.
3. Inspect fan wheel and remove
blockage.
4. Remove blockage and clean air
inlet and air outlet.
5. Call Customer Service.
6. Call Customer Service.
Motor runs, but wheel
spins irregularly or hits
sides.
1. A heavy impact has bent the
motor suspension so that the
wheel is stuck.
2. A heavy impact has let
the motor slide out of the
suspension so that the wheel is
stuck.
1. Call Customer Service.
2. Call Customer Service.
Device vibrates
excessively.
1. Fan wheel is stuck.
2. Fan wheel is unbalanced.
3. Fan wheel is bent.
4. Motor shaft is bent.
1. Clean fan wheel.
2. Call Customer Service.
3. Call Customer Service.
4. Call Customer Service.
5
