46
EN
VI
. MAINTENANCE
This product must be earthed. If the power cord
is damaged,it must be replaced with a manufacturer
recommended power cord.
DO NOT TANGLE THE POWER CORD
REGULAR MAINTENANCE OF THE TREADMILL
STORAGE:
Keep your equipment in a enclosed place, away from dust or humidity. Don’t store it neither
in a garage or in a indoor backyard, or near the water. Humidity, dust and water could damage it and
have an effect on its functioning
ELECTRIC CABLE:
Make sure that the cable and plug are in perfect conditions. Electric cables must be
away from hot surfaces
SCREWS AND CONNECTING CABLES:
Supervise and tighten the screws on a regular basis, because due
to the vibration the screws and nuts tend to loosen.
LUBRICATION:
It’s a correct lubrication of the treadmill with silicon oil or
teflon is really important. This lubrication must be performed regularly
depending on its use even before the first use.a) The step to lubricate the running board is as follows: (see
the above figure)
b) Stop the running belt and fold the treadmill.
c) Turn over the running belt at the back of the main frame.
Insert the lubricant pot as deep as possible into the middle
of the running belt. Apply the lubricant onto the inner side of
the running belt. Lubricate both sides of the running belt.
After the lubrication is completed, start the machine at 1km/h to let the running belt bring silicon all over
the board.
After running for a period of time, the treadmill must be configured with special cymene silicone oil for
lubrication.
Suggestion:
< 3 hours/week
2 months
4 – 7 hours/week
1 month
> 8 hours/week
15 days
