Master Eliptical MASTER E11, Руководство пользователя

Страница: 26 / 30

5
EN
Step 3:
A: Fix the Swing bar (6L) on the long axle of the Handlebar post (2) with Hex bolt (24), Spring
washer (52), Flat washer (25), Waveform washer (64) and Long axle (27) as shown. Please do
not tighten them this time.
B: Attach the connecting joint together with Pedal Support (5L) to the Crank (22) using Pedal
support bolt (38L), Waveform washer (62), Spring washer (41) and Nylon nut (42L) as shown.
Please do not tighten them this time.
C: Connect Swing bar (6L) with Pedal support (5L) using Hex bolt (30), Flat washer (31) and Nylon
nut (32). Tighten the Hex bolt (24) (30) and Nylon nut (42L). Finally Cover the Nut caps (23) (57)
(43).
D: Fix the Pedal support (5R) and Swing bar (6R) to Crank (22) and Handlebar post (2) in the same
way.
E: Fix the Pedal (10L/R) to the Pedal support (5L/R) with Hex bolt (33), Flat washer (34) and Nylon
nut (35).
Step 4:
A: Put the Pulse sensor wire (50) through the handlebar post (2) and then out of the hole of the
computer bracket. Fix the armrest (8) on the handlebar post (2) with Hex screw (51) and Spring
washer (52) and then cover the Handlebar chuck cover (53) to the related position.