UNIT B
1.
INTAKE GRILLE REMOVAL
(1) Open the intake grille.
(2) Open the intake grille and lift the intake grille upward until the hook
at the top of the intake grille is unhooked.
Fig. 54
2.
FRONT PANEL REMOVAL
(1) Remove the four tapping screws.
(2) Remove the front panel by lifting the bottom of the front panel
upward.
Fig. 55
3.
FRONT PANEL INSTALLATION
(1) Hook the top hole of the front panel to the hook of the base.
(2) Fasten the front panel with the screw.
Fig. 56
FRONT PANEL REMOVAL
CAUTION
Install the front panel and intake grille securely. If in-
stallation is imperfect, the front panel or intake grille
may fall off and cause injury.
UNIT A1 and A2
1.
INTAKE GRILLE REMOVAL
(1) Place your fingers at both lower ends of the grille panel, and lift
forward; if the grille seems to catch partway through its movement,
continue lifting upward to remove.
(2) Pull past the intermediate catch and open the intake grille wide so
that it becomes horizontal.
Fig. 50
2.
UNLOCK THE INTAKE GRILLE
Hold the intake grille with one hand and pull the knobs on the right and
the left all the way to unlock the intake grille.
Fig. 51
(1) Remove the two screws.
(2) Unhook the tab at the center of the front panel.
(3) Remove the front panel by lifting it in the arrow direction.
Fig. 52
3.
FRONT PANEL INSTALLATION
(1) Engage the body tabs by pressing on the top of the unit at the three
points indicated by the arrows until the tabs make a sound.
(2) Engage the tab at the center of the front panel and fasten the front
panel with the two screws.
Fig. 53
Tapping screw
(Hook)
Open
Lift
Intake
grille
Lift
Lift
(Hook)
Open
Front
panel
(Top hook)
Front panel
(Top hole)
Intake grille
Be sure that the top hole of the front panel is attached securely to
the hook of the base.
Mounting shaft
Raise the horizontal intake grille to remove it.
Tab
Tab
Knob
