Master 1121.2, Руководство пользователя и инструкция по установке

Страница: 17 / 18

Pagina 17
C
ONCLUSIONS
Connect the power supply cable of the chain actuator and select the stroke.
Recess mount the actuator in the hole made previously, taking particular care not to ruin
the cables, moving it first towards one side and then centering it on the fastening holes.
Perform a final test and verify that the device operates correctly on the window frame.
Check that once the product is installed, the gripping hook of the sliding accessory is
completely hooked when the actuator is closed.
ENVIRONMENTAL PROTECTION
All the materials used for construction of the machine are recyclable.
It is recommended that the machine itself, the accessories, packing materials,
etc. be sent to a recycling center as required by current laws on waste
recycling.
Components of the device:
Iron Aluminum Copper Zinc Silicon Plastic
REFERENCE TO THE PRINCIPLES OF THE WARRANTY CERTIFICATE
The manufacturer guarantees good operation of the machine. The
manufacturer also undertakes to replace pieces that are defective due to
poor quality of the material or manufacturing defects as set forth in article
1490 of the Italian Civil Code.
The warranty covers the products or individual parts for a period of 2 years
from the date of purchase. The warranty is valid if the buyer is able to
exhibit proof of purchase and has met the agreed payment terms and
conditions.
The guarantee of good operation of the devices granted by the
manufacturer is understood in the sense that the manufacturer undertakes
to repair or replace, free of charge and in the shortest time possible, those
parts that have failed during the warranty period. The buyer cannot claim
right to any compensation for any direct or indirect damages or other
expenses. Any repair attempts made by personnel who have not been
authorized by the manufacturer void the warranty.
Fragile parts or parts subject to natural wear, corrosive agents or
procedures, excessive loads (even if only temporary), etc., are not covered
by the warranty. The manufacturer will not be held liable for any damage
caused by incorrect assembly, handling or insertion, excessive stress or
inexperienced use.
The repairs under warranty are always understood to be "ex-factory". The
buyer must always pay the respective shipping expenses (to and from the
factory).
MASTER S.r.l. – I417B - 11/03/2014
Master Srl may not be held liable in any way whatsoever for any inaccuracies due to printing or data transcription errors in this document
E
N
G