2
NOTE:
The model MP-MBA-30T has been tested and certified by the
Water Quality Association according to NSF/ANSI 44 for the specific
performance claims as verified and substantiated by test data as follows:
Rated Efficiency: 3890 Grains per pound of salt
3.5 lbs salt: 13.6 Kg Capacity
9 lbs salt: 26.7 Kg Capacity
15 lbs salt: 31.0 Kg Capacity
Rated Service Flow: 10.0 GPM @ 12 psi pressure drop
Resin: 1.0 Cubic Ft. Cation Exchange resin
Water Softener Positioning:
1. Place water softener in desired position, far enough from walls
and other obstructions to allow for servicing the unit.
2. Place the water softener within reasonable access to a grounded
115V/60 HZ circuit and a legal drain line connection.
Logix Control Valve:
1. When facing the front of the Logix timer, the inlet connection
(
Figure 1)
is located on the left and the outlet connection is on the
right. The control valve's inlet and outlet connections are either
3/4” copper or pvc equipped with gasket and nut.
Figure 1
Install the 256 bypass valve
(See Figure 2)
with inlet and outlet
handles facing upward. Place gasket into nut and secure 3/4” copper
or pvc tail piece with a nut. Repeat the procedure for the outlet
connection.
DO NOT OVERTIGHTEN THE NUT.
