32
DO NOT DIVE.
103
DO NOT DIVE.
CLEANING YOUR FILTER ELEMENTS
The filter elements are one of the most important components of your spa. Not only are
they essential for clean water; they also extend the life of the spa equipment and help avoid
unnecessary water changes and re-heating. Your filter elements should be cleaned on a regular
basis, at least once a month on average with normal usage. With heavy use, poor water quality
and/or high dissolved solid content in water; the filters may need to be cleaned more often. It
recommended to allow filter elements to fully dry after cleaning. For this reason, it is ideal to have
a spare set of filters on hand for filter cleaning intervals.
1.
Turn off the spa before servicing filters. Never leave to the spa running when removing the
filters. Debris can be pulled into the plumbing system and cause unwarranted damage.
2.
Remove filter element(s).
3.
With a garden hose, spray each element under pressure. Monthly, the standard filter elements
should be soaked in a filter cleaner. Do not soak EcoPur
®
element in a filter cleaner. The EcoPur
®
element should only be rinsed with fresh, clean water if necessary. Check with your Master Spas
dealer for details on cleaning and/or filter replacement recommendations.
4.
The EcoPur
®
element should be replaced every 6 months. The standard filter should be cleaned
regularly and will typically last approximately 1 year. Bather load, usage and water quality will
effect the longevity of the filters and require more frequent cleaning or replacement.
REGULAR MAINTENANCE PROCEDURES
NOTE: These maintenance procedures are the responsibility of the spa owner to perform. These
procedures are not covered by the spa warranty.
WATCH HOW-TO VIDEOS:
masterspas.com/video-tutorials
