REGULAR MAINTENANCE PROCEDURES
35
Note: These are areas that will require the spa owner to perform routine
maintenance. These are not areas covered under the warranty of the spa.
CLEANING JETS
The majority of jets in your spa can individually be
turned on/off. If any of these jets become hard to
turn, it will be necessary to remove the jet to clean
it as grit/sand and mineral deposit may be present.
Jets are removed by turning the collar and then
pulling out the jet. Some jets may not be removable
depending on model.
TO CLEAN JETS
Place the jet(s) in a bucket, fully immerse in white vinegar. Let the jet(s) soak
overnight and then rinse with water. Reinstall the jet(s). It may also be necessary
to clean the grit/deposit from the white jet body using an old toothbrush.
DRAINING YOUR SPA
The drain is located behind the front panel on the far
right side, grasp the hose bib cap and turn it counter
clockwise. Attach a garden hose, if desired. Turn the black
knob on the side of the valve a quarter turn. Draining
times may vary by model using the external hose bib.
A sump pump may also be used to drain the spa quickly.
Master Spa Parts
Call Us Today: - (920)727 - 1700
Master Spa Parts - 1068 American Drive, Neenah, WI, 54956, USA
