8
4.
Press min/max is for calibrating the sensor, do NOT change unless instructed
to.
5.
TOP/BOT temp PID , do NOT change these unless instructed to.
6.
Save saves the settings
Import/Export Profiles
1.
Install the import/export program on your computer.
2.
Connect the USB on the back of the press to a USB port
3.
Click REFRESH on the program, connect to the proper port
4.
Go to the SETUP page on the press
5.
To EXPORT the profiles, press EXPORT on the press then press READ
PROFILES in the program, this will export the profilers to a file on your
computer.
6.
To IMPORT the profiles, LOAD a CSV profiles file first.
7.
press IMPORT on the press then press WRITE PROFILE on the computer,
this will write the file to the press.
8.